WirelessHART networks for process automation
Wireless communication quickly gains relevance in automation applications. For process automation, it is not the amount of data that poses challenges, but the distances to be bridged. Whenever the plant architecture does not allow conventional wiring, values are only accessible through frequent visits to the field.
WirelessHART offers a cost efficient solution. Measured values become available on a regular basis, which leads to increased quality and more economical operation of process plants.
In a WirelessHART based network, every participating device simultaneously works as a signal source and a repeater. Through the routing of the individual signals across the entire network, a wide network structure becomes possible.WirelessHART products from Pepperl+Fuchs
Pepperl+Fuchs offers several modules to connect sensors to a control system or asset management system with a wireless network. These WirelessHART products support the installation of field devices from different manufacturers without the need for additional wiring effort and costs. A reliable, interference-free communication is established with the following components.
The core element and most advanced device within a WirelessHART network is our WirelessHART gateway, which establishes the wireless connection to the network. It offers one or more interfaces for host systems (RS 485, Ethernet, PROFIBUS) and is equipped with “Network Manager” and "Security Manager".
WirelessHART adapters can be connected to every conventional HART or 4 mA … 20 mA field device directly or with a short cable. They read the data of the field device via HART or translate the 4 mA … 20 mA signal to a digital value and transmit the data to the WirelessHART network. These highly flexible solutions turn every field device into a WirelessHART field device.
The WirelessHART temperature converter is a field device that is already equipped with a WirelessHART interface. In this case, the 4 mA…20 mA interface is replaced by an antenna.
Pepperl+Fuchs offers a variety of accessories for WirelessHART installations. The portfolio consists of antennas, adapters, coaxial cables, and surge protectors.
The BULLET is the only WirelessHART adapter on the market in an Ex d housing. Simply connect the BULLET to your field device and enable efficient, wireless signal transmission.
Pepperl+Fuchs SE
Lilienthalstraße 200
68307 Mannheim
Germany
info@de.pepperl-fuchs.com
+49 621 776-0
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.