  |
| |
| Product |
|
|
|
| Counter frequency up to 20 kHz, LED indicator, red, 6 decade devices, Operation via keypad, Two counter inputs, Operating voltage: 10 ... 30 V DC, Dimensions: 48 mm x 24 mm x 65 mmfa |
|
|
|
|
|
| Counter frequency up to 20 kHz, LED indicator, red, 6 decade devices, Operation via keypad, Two counter inputs, Operating voltage: 10 ... 30 V DC, Optocoupler: Semiconductor output 30 V, max. 10 mA, Dimensions: 48 mm x 24 mm x 65 mmfa |
|
|
|
|
Counter/Timer/Tachometer, Extremely bright, large LED indicator, 1 pre-select value with transistor output, PNP and NPN sensors can be connected, Adding/subtracting via 2 separate inputs, Operating voltage: 90 ... 260 V AC, Optocoupler: NPN, open collector and open emitter
30 V / 15 mA, Dimensions: 96 mm x 48 mm x 90 mmfa |
|
|
|
|
Simple pre-selection setting via one button per decade, Easy-to-read 2-line LCD indicator, With battery operation, Relay output, Input for keypad locking, Operating voltage: Battery 2 x 3.6 V, Relay: normally open contact (max. 60 VA)
230 V AC/0.5 A; 60 V DC/2 A, Dimensions: 48 mm x 48 mm x 85 mmfa |
|
|
|
|
| Timer/hour meter, Separate start input available, Easy-to-read 7-digit LCD display, Lockable reset, Degree of protection IP65 (front only), Operating voltage: 10 ... 30 V DC, Dimensions: 48 mm x 24 mm x 53.5 mmfa |
|
|
|
|
| 1-channel signal conditioner, 24 V DC supply, Input for 2- or 3-wire sensors, Input frequency 10 mHz ... 50 kHz, Relay contact output, Start-up override and restart inhibit, Configurable by DIP switches and software, Connection via screw terminals, Number of channels: 1-channel, Restart inhibit, Start-up override, Signal type: Digital Input, Rated voltage: 16.8 ... 31.2 V DC, Field device: NAMUR sensor, Field device [2]: volt-free contact, Field device [3]: 2-wire DC sensor, Field device [4]: SN sensorpa |
|
|
|
|
| Multifunction device with operating modes such as rev counter, other counters, throughput time display, position display, timer for runtimes, stopwatch, and process display, HTL inputs for encoders and sensors with NPN, PNP and NAMUR characteristics, Bright, high-contrast display with event-dependent color versions, Emulation of a seven-segment display with symbols and units, Auxiliary voltage output 5/24 V DC for encoder supply, Operating voltage: 115 ... 230 V AC, 50 ... 60 Hzfa |
|
|
|
|
| Multifunction device with operating modes such as rev counter, other counters, throughput time display, position display, timer for runtimes, stopwatch, and process display, HTL inputs for encoders and sensors with NPN, PNP and NAMUR characteristics, Bright, high-contrast display with event-dependent color versions, Emulation of a seven-segment display with symbols and units, Auxiliary voltage output 5/24 V DC for encoder supply, Operating voltage: 18 ... 30 V DCfa |
|
|
| |
+49 621 776-0